Fujitsu ETERNUS SF Express V16.6 Migration Manual page 246

1.
If the Storage Cruiser's agent has been installed, start the service of the Storage Cruiser's agent. Refer to "Starting and Stopping
Agent" in the ETERNUS SF Storage Cruiser Operation Guide for information on how to start the service.
2.
Starting the service of AdvancedCopy Manager's agent
With the Windows services screen, start the AdvancedCopy Manager COM Service.
3.
To ensure data consistency, with the Management Server, execute the stgxfwcmmodsrv command to change the server
information.
When executing the stgxfwcmmodsrv command, specify the Managed Server name for the -n option.
-
When the Management Server OS is Windows
programDir\ACM\bin\stgxfwcmmodsrv -n serverName
-
When the Management Server OS is Solaris or Linux
/opt/FJSVswstf/bin/stgxfwcmmodsrv -n serverName
Note
For changing the server information, start a new window for command execution, and then perform the procedure on the
window.
See
Refer to "Command References" in the ETERNUS SF AdvancedCopy Manager Operation Guide relevant to the OS of the
Management Server for this version for information on the command.
4.
Perform the following operations with Web Console to reload the server information.
a.
On the global navigation tab, click Server.
The registered server list is displayed in the Main pane.
b.
On the Main pane, check the target server checkbox.
If the target server is a VM guest, check the checkbox of the VM host where the VM guest exists.
c.
On the Action pane, click Reload Conf. under Server.
Point
Once normal operation has been confirmed after the upgrade of the AdvancedCopy Manager's agent, the backup data in the backup
destination directory created in step 4-d of
10.3.2 Upgrading on Clustered Systems
10.3.2.1 Preparing for Upgrade
Point
It is recommended that you back up the following resources before starting the upgrade.
By preparing a backup, in cases when an error occurs during the upgrade, it is possible to return the system to its state prior to the
upgrade, simply by recovering (restoring) the system from the backup.
-
System (the primary node and the secondary node)
-
Shared disk for shared data of Managed Server transactions
"10.3.1.1 Preparing for Upgrade" maybe deleted.
- 222 -