Performing Upgrade (Primary Node); Performing Upgrade (Secondary Node); Tasks To Be Performed After Upgrade (Primary Node) - Fujitsu ETERNUS SF Express V16.6 Migration Manual

-
In cases when Managed Server transactions coexist, do not release the configurations of these Managed Server transactions.
6.2.2.3

Performing Upgrade (Primary Node)

Refer to "C.2 Procedures for Upgrade Installation of Manager Feature of Express / Storage Cruiser / AdvancedCopy Manager Version 14.x
and 15.x (for Solaris, Linux)"to perform the upgrade.
Information
When the Upgrade Installation terminates in an error, perform recovery by following the steps outlined below:
1.
Install the target version.
2.
If the installation is successfully completed, continue from
6.2.2.4

Performing Upgrade (Secondary Node)

Perform the upgrade for the secondary node.
The upgrade procedure is the same as that for the primary node. Refer to
Information
When the Upgrade Installation terminates in an error, perform recovery by following the steps outlined below:
1.
Install the target version.
2.
If the installation is successfully completed, continue from the following tasks.
After upgrading on the primary node and the secondary node, perform the cluster setup. Refer to "Preparations for Customizing
Management Server Transactions" and "Customization for Management Server Transaction" in the ETERNUS SF Cluster Environment
Setup Guide for this version for information on the cluster setup.
In cases when Managed Server transactions coexist in the cluster system, restore the AdvancedCopy Manager daemon start and stop
script of the Managed Server transactions backup location (step 17 of
-
On the primary node and the secondary node, restore the AdvancedCopy Manager daemon start and stop script of the Managed
Server transactions.
6.2.2.5

Tasks to Be Performed After Upgrade (Primary Node)

The tasks below need to be performed on the primary node.
1.
Stop the cluster application (transaction)
Stop the cluster application (transaction) to which ETERNUS SF Manager belongs. Refer to the relevant cluster software manuals
for information on stopping it.
However, the shared disk for shared data of ETERNUS SF Manager must be mounted.
2.
If Managed Server transactions coexist in the clustered system, edit the environment setting files for AdvancedCopy Manager on
the shared disk for Managed Server transactions shared data, on the primary node for a target service.
On the primary node for target transactions, edit the following files:
-
<Mount point of shared disk for shared data of Managed Server transaction>/etc/opt/swstorage/clsetup.ini
-
<Mount point of shared disk for shared data of Managed Server transaction>/etc/opt/swstorage/swstg.ini
Change the version information within each file, as follows:
"6.2.2.4 Performing Upgrade (Secondary
"6.2.2.3 Performing Upgrade (Primary
"6.2.2.2 Preparing for
- 69 -
Node)".
Node)".
Upgrade").