Table of Contents
Advertisement
SECTION 4 |
4.3.2 Disabling Password Protection
In the default / factory preset condition, Password Protection is enabled.
Password Protection may be disabled, if required.
Procedure is given below:
1. Press ENTER Key momentarily from any Operating Mode Screen (see details at Table 3.1)
S e l e c t
G r o u p
*
C H A R G E
C U R V E
2. Press "Down Key" 4 times to scroll to "*OTHER FUNCTION" screen.
S e l e c t
G r o u p
*
O T H E R
F U N C T I O N
3. Press ENTER Key momentarily
S e l e c t
G r o u p
O T H E R
F U N C T I O N
*
P O
E R
S A V I N G
W
0 = D i s a b l e
4. Press DOWN Key momentarily, (i) 11 times for EVO-1212F / 1212F-HW / 1224F / 1224F-HW / 4248SP or
S e l e c t
G r o u p
O T H E R
F U N C T I O N
*
P A S
O R D
D I S A B L E
W
0 = D i s a b l e
5. Press ENTER Key momentarily
P a s w o r d
k e y
i n
0 0 0 0
Parameter Setup
•
Screen No. 1 of "Select Group * CHARGE CURVE"
(Fig 4.1) will appear as shown on the left.
•
Screen No. 5 of "Select Group * OTHER FUNCTION"
(Fig 4.1) will appear as shown on the left.
•
Screen No. 1 of "Select Parameter, OTHER FUNCTION,
*POWER SAVING, 0=Disable" (Fig 4.4) will appear as in
the left.
(ii) 12 times for (a) EVO-2212 / 3012 / 2224 / 4024 and (b) EVO-2212E /
3012E / 2224E / 4024E
•
Screen "Select Parameter, OTHER FUNCTION, * PASSWORD DISABLE,
0=Disable" (Fig 4.4) will appear as on the left.
NOTE: Default value is 0=Disable i.e. Disable the command "DISABLE
PASSWORD" which means enable password protection.
•
Password consisting of 4 digits "0000" will be requested as shown on
the left (NOTE: Password to be entered is 8052). The first digit will have
a blinking cursor "_". Use Up /Down Keys to scroll to number 8 for the
first digit "8" of the password. Momentarily press Enter Key (Short
press). Digit 8 will be entered as the first digit of the Password and the
blinking cursor will automatically move to the 2nd digit (0) to the right.
As the next digit in the Password "8052" is already "0", momentarily
press Enter Key (Short press) to enter "0" in the second digit. The
blinking cursor will automatically move to the 3rd digit (0). Use Up /
Down Keys to scroll to number 5 for the 3rd digit "5" of the password
"8052" and momentarily press Enter Key (Short press). The blinking
cursor will automatically move to the 4th digit (0). Use Up /Down Keys to
scroll to number 2 for the 4th digit "2" of the password "8052". Now
keep the Enter Key pressed continuously for longer time (3 to 4 sec)
to write the full password of 4 digits i.e. "8052".
SAMLEX AMERICA INC. | 49
Advertisement
Table of Contents
