SamplexPower EVO-RC-PLUS Owner's Manual page 112

SECTION 5 |
With default setting of parameter "DATALOG TIME" (Section 4.8.2.10) set at option "1=1sec", data logging will
commence as soon as the SD Card is inserted in the SD Card Slot in the EVO-RC-PLUS Remote Control (Section 5.2.3).
In case parameter "DATALOG TIME" (Section 4.8.2.10) has been set at option "0=Disable", data logging will NOT
commence automatically when the SD Card is inserted in the SD Card Slot in the EVO-RC-PLUS Remote Control.
5.2.2 DATA LOGGING Fields
Various Operating Parameters "Error Codes" and "Events" are recorded under DATA LOGGING fields shown in Figs
5.1 to 5.3.
5.2.2.1 DATA LOGGING Fields for Models EVO-1212F / 1212F-HW / 1224F / 1224F-HW
"DATA LOGGING" Fields for models EVO-1212F/1212F-HW/1224F/1224F-HW are shown in Fig 5.1 below:
Date
Output VA
Hear sink
temperature 1 (C)
Fig 5.1 Data Logging Fields for EVO-1212F/1212F-HW/1224F/1224F-HW
5.2.2.2 DATA LOGGING Fields for (i) EVO-2212 / 3012 / 2224 / 4024 & (ii) EVO-2212E / 3012E / 2224E / 4024E
"DATA LOGGING" Fields for models: (i) EVO-2212 / 3012 / 2224 / 4024 & (ii) EVO-2212E / 3012E / 2224E / 4024E are
shown in Fig 5.2 below:
Date
Output
freq
Transformer
temperature (c)
Fig 5.2 Data Logging Fields for (i) EVO-2212 / 3012 / 2224 / 4024 & (ii) EVO-2212E / 3012E / 2224E / 4024E
112 | SAMLEX AMERICA INC.
SD Card
Grid Grid Grid
Time
status freq volt
Output watt Battery volt
Hear sink
temperature 2 (C)
Gen Gen
Time
status freq
Output Output Output
Volt current VA
Busbar Heat sink
temperature(c) temperature (c)
Input Input Inputt
current VA watt
Battery External
current current
Fan
Mode
speed
Gen Grid Grid Grid
volt status freq volt
Output Battery
watt volt
Fan
Mode
speed
Output Output Output
freq Volt current
Battery Transformer
temperature (C) temperature (C)
Error Charge
Event
code stage
Input Input Inputt
current VA watt
Battery External Battery
current current temperature (c)
Error Charge
Event
Code stage