Table of Contents
Advertisement
SECTION 3 |
i. On the EVO-RC-PLUS:
a. For EVO-1212F/1212F-HW/1224F/1224F-HW:
The LCD will show the 1st Screen (Screen 1) of the 7 Standby Mode Screens [See Fig 3.1(a)]
•
E V O - 1 2 1 2 F
A C
o u t p u t :
Blue LED marked "Status" (3, Fig 1.1) will blink once every 5 sec
•
b. For (i) EVO-2212/3012/2224/4024 and (ii) : EVO-2212E/3012E/2224E/4024E
The LCD will show the 1st screen (Screen 1) of the 9 Standby Mode Screens for (i) EVO-
•
2212/3012/2224/4024 and (ii) EVO-2212E/3012E/2224E/4024E [see at Fig 3.1(b)]
E V O - 3 0 1 2
A C
o u t p u t :
c. For EVO-4248SP:
The LCD will show the 1st screen (Screen 1) of the 7 Standby Mode Screens for EVO-4248SP
•
[See Fig 3.1(c)]
E V O - 4 2 4 8 S P
A C
o u t p u t :
Blue LED marked "Status" (3, Fig 1.1) will blink once every 5 sec
•
ii. On the Front Panel of EVO
Inverter/Charger Manual) will blink once every 5 sec. Red LED marked "FAULT" (13, Fig 2.1 of EVO
Charger Manual) and Buzzer will be off
3.4.1.2 Exiting Standby Mode:
Using EVO-RC-PLUS: To exit Standby Mode using EVO-RC-PLUS, press the On/Off Key (2, Fig 1.1)
•
momentarily (0.1 sec).
From Front Panel of EVO
•
sec) press the On/Off Push Button on the front panel of the EVO
Manual)
i
INFO
Please note that when Standby Mode is exited, EVO
Operating Mode from the beginning. It will NOT start from the last condition of the operating stage it was in
when Standby Mode was activated
3.5. FAULT MESSAGES & CLEARING FAULTS
If any fault occurs, the LCD screen will display the Fault Message and the Red LED "Fault" (4, Fig 1.1) will be lighted.
Refer to Table 7.1 at Section 7 for details of various fault messages and procedure to clear the fault.
12 | SAMLEX AMERICA INC.
Operation
S t a n d b y
0 . 0 V
< 0 . 1
A
0 . 0 0 H z
S t a n d b y
0 . 0 V
< 0 . 1
A
0 . 0 0 H z
S t a n d b y
0 . 0 V
0 . 0 H z
< 0 . 1 5 A
< 0 . 1 5 A
Inverter/Charger: The Blue LED marked "ON" (12, Fig 2.1 of the EVO
TM
Inverter/Charger Unit: To exit Standby Mode from the EVO
TM
(11, Fig 2.1 of the EVO
TM
Inverter/Charger Unit will execute the programmed
TM
TM
Inverter/
TM
unit, momentarily (0.1
TM
Inverter/Charger
TM
Advertisement
Table of Contents
