Table of Contents
Advertisement
SECTION 4 |
4.0 "SELECT GROUP" AND "SELECT PARAMETER" MENU MAPS
4.1.1 General Information
A number of operating parameters can be programmed to suit the desired operating conditions. The programming
parameters have been arranged under 7 groups displayed as "SELECT GROUP" as per details at Table 4.1 below.
"Select Group" Menu Map for accessing the 7 Parameter Groups is shown at Fig 4.1.
Table 4.1 List of Parameter Groups (Displayed as "Select Group"
"Select Group"
Screen No.
"Select Group" Name
1
CHARGE CURVE
2
INPUT SETTING
3
INPUT LOW LIMIT
4
INPUT HIGH LIMIT
5
OTHER FUNCTION
6
RC PLUS SETTINGS
7
TIME SETTING
8
STOP SD CARD
The 1st screen for "Select Group" - CHARGE CURVE will be accessed when Enter Key is pressed momentarily from any
of the Operating Mode Display Screens detailed at Table 3.1.
Fig 4.1 shows "Select Group" Menu Map for the 8 Parameter Groups. Use the Up and Down keys to navigate to the
desired Parameter Group or the Back key to go back to the Operating Mode Screen. Press Enter to access Parameters
in the selected Parameter Group.
For explanation of the format of the "Select Group Screens" shown in Fig 4.1, consider Group 1 Screen - CHARGE
CURVE. The 1st line shows the action i.e. "Select Group". The 2nd line shows the name of the "Select Group" -
CHARGE CURVE with an asterisk sign * against it. The asterisk sign * indicates that this Group will be selected when
Enter Key is pressed. When Enter Key is pressed, access will be available for parameters under this group.
38 | SAMLEX AMERICA INC.
Parameter Setup
Group of parameters for battery charging/battery
protection
Group of parameters for Grid/Generator input
current level, frequency range
Group of parameters for Grid/Generator input low
voltage level
Group of parameters for Grid/Generator input
high voltage level
Group of parameters Power Saving/Buzzer/
Remote Switch/Multi-function Relay/etc.
RC Plus Settings
1 parameter for Real Time Clock setting
NOTE:
Shown only when SD Card is inserted.
1 parameter to stop SD Card access and to
remove the SD Card.
Description
"Select Group"
Menu Map
Fig 4.1
Advertisement
Table of Contents
