Navigating Between Menus - Datakom D-500 MK2 User Manual

D-500 MK2 User Manual

16.3. NAVIGATING BETWEEN MENUS

The program mode is driven with a two level menu system. The top menu consists on program groups
and each group consists on various program parameters.
When program mode is entered, a list of available groups will be displayed. Navigation between different
groups are made with
order to enter inside a group, please press MENU
◄
please press MENU button.
If inside the
group then
exit to main
PGM menu
Next group
Navigation inside a group is made also with
be displayed. Selected parameter is shown in reverse video (blue on white). In order display/change the
value of this parameter, please press MENU
▼
decreased with
increased/decreased by steps of 10. When a program parameter is modified, it is automatically saved in
►
memory. If MENU
then the list of parameters in this group will be displayed.
Return to the
main menu
Next
parameter
inside the
same group
▼ ▲
and buttons. Selected group is shown in reverse video (blue on white). In
▲
and buttons. If these keys are hold pressed, the program value will be
button is pressed, next parameter will be displayed. If
►
button. In order to exit from the group to the main list
▲
▼
and buttons. A list of available parameters will
►
button. Parameter value may be increased and
- 95 -
Firmware V-6.3
Enter inside
the group
Previous
group
◄
MENU button is pressed,
Edit
parameter
value
Previous
parameter
inside the
same group