Table of Contents
Advertisement
D-500 MK2 User Manual
17.5. WEEKLY OPERATION SCHEDULE
In AUTO mode, it is possible to define the periods where automatic operation is desired. It may be
required that the genset does not start at night or weekends.
Weekly schedule programs allow an hourly setting of automatic operation of the unit during one week.
There are 7days x 24hours =144 parameters. Each hour of the week can be independently defined as
AUTO or OFF period.
If automatic operation is disabled by the weekly
exerciser, the AUTO led will flash.
- 120 -
Firmware V-6.3
Advertisement
Table of Contents
