Table Of Contents - Datakom D-500 MK2 User Manual

D-500 MK2 User Manual
1. INSTALLATION INSTRUCTIONS
2. MOUNTING
2.1 DIMENSIONS
2.2 SEALING, GASKET
2.3 ELECTRICAL INSTALLATION
3. TERMINAL DESCRIPTIONS
3.1. BATTERY VOLTAGE INPUT
3.2. AC VOLTAGE INPUTS
3.3. AC CURRENT INPUTS
3.4. DIGITAL INPUTS
3.5. ANALOG SENDER INPUTS AND SENDER GROUND
3.6. CHARGE INPUT TERMINAL
3.7. MAGNETIC PICKUP INPUT
3.8. DIGITAL OUTPUTS
3.9. MAINS CONTACTOR OUTPUT
3.10. GENERATOR CONTACTOR OUTPUT
3.11. INPUT/OUTPUT EXTENSION
3.12. J1939-CANBUS PORT
3.13. USB DEVICE PORT
4. PLUG-IN MODULES
4.1. MODEM PLUG-IN
4.1.1. GSM MODEM SLOT
4.1.2. Wi-Fi SLOT
4.1.3. ETHERNET SLOT
4.1.4. RS-485 SLOT
4.2. SYNCHRONIZATION PLUG-IN
4.2.1. ANALOG AVR CONTROL OUTPUT
4.2.2. ANALOG GOVERNOR CONTROL OUTPUT
4.2.3. DATALINK-CANBUS PORT
4.2.4. ANALOG LOAD SHARE SIGNAL
4.3. ANALOG PLUG-IN
4.3.1. ANALOG I/O EXTENSION SLOT
4.3.2. 3 X MAINS CT INPUTS SLOT
4.4. COMMUNICATION SLOT
4.4.1. ETHERNET PORT
4.4.2. USB HOST PORT
4.4.3. RS-485 PORT

TABLE OF CONTENTS

- 6 -
Firmware V-6.3