Topologies; Selecting The Topology - Datakom D-500 MK2 User Manual

D-500 MK2 User Manual

5. TOPOLOGIES

Various topologies are selectable through program parameter.
The topology is independently selectable for both genset and mains sections.
In following drawings, the connections are shown for the alternator. Current transformers are supposed
connected to the alternator side.
Similar topologies are available for the mains side as well.

5.1. SELECTING THE TOPOLOGY

Generator
Parameters
s
Mains
Parameters
s
- 39 -
Firmware V-6.3
Topology
Selection
Topology
Selection