Ethernet Parameters - Datakom D-500 MK2 User Manual

D-500 MK2 User Manual
17.14. ETHERNET PARAMETERS (continued)
Parameter Definition
Mail Account Name
Mail Account
Password
Mail Server Address
E-mail Address-1
E-mail Address-2
E-mail Address-3
Below ETHERNET related parameters are found in the
Controller Configuration group.
Parameter Definition
Web Programming
Enable
Web Control Enable
Web Refresh Rate
Ping Period
Rainbow Refresh Rate
Rainbow Address-1 Port
Rainbow Address-2 Port
Web Server Port
Modbus TCP/ Port
SMTP Port
Ethernet Enable
E-mail on IP Change
Factory Set
d500_a
d500_1234
smtp.mail.yahoo.com
-
-
-
Unit Min Max
- 0 1
- 0 1
sec 0 240
min 0 240
sec 0 65535
- 0 65535
- 0 65535
- 0 65535
- 0 65535
- 0 65535
- 0 1
- 0 1
- 131 -
Description
This is the account name appearing in the "from" tab
of the e-mail recipient. (ex: D500@gmail.com)
This is the e-mail password of above e-mail account.
This is the Outgoing Mail Server Address of the above
e-mail account (ex: smtp.gmail.com)
These are e-mail recipient addresses where the unit is
intended to send e-mail messages. Up to 3 e-mails can
be sent at once.
Factory Description
Set
0: Web programming disabled
0
1: Web programming enabled
0: Web control disabled
0
1: Web control enabled
The unit will refresh the web page with
5
this interval.
The unit will check the availability of the
0
internet connection with this interval.
The unit will update the distant
5
monitoring terminal with this rate.
This is the port number of the first
0
monitoring terminal address.
This is the port number of the second
0
monitoring terminal address.
This is the port number of the internal
80 web server. The unit will answer queries
to this port only.
This is the port number of the internal
Modbus TCP/IP terminal. The unit will
502
answer Modbus requests to this port
only.
This is the port number used for e-mail
587
sending.
0: ethernet port disabled
1
1: ethernet port enabled
This parameter controls e-mail sending
when IP address of GPRS or ethernet
connection is changed. No warnings
0
generated.
0: no e-mail on IP change
1: e-mail sent on IP change
Firmware V-6.3