D-500 MK2 User Manual
10.4. AUTOMATIC DISPLAY SCROLL
The unit will automatically scroll all Mains, Genset and Engine measurements with programmable
interval. The scroll period setting can be performed using the RainbowPlus program through Module >
Screen options.
Eventually the same parameter can be modified through the front panel programming menu. The related
parameter is Controller Configuration > Screen Scroll Timer.
If the Screen Scroll Timer is set to zero, then scrolling will be
disabled.
When a front panel button is pressed, the scrolling is
suspended during 2 minutes.
If a fault condition occurs, the display will automatically
switch to the ALARM LIST page.
- 71 -
Firmware V-6.3
Screen Scroll
Timer