Removing The Storage Tray Assembly - HP Visualize b132L Service Handbook

Field Replaceable Units
FRU Removal and Replacement
4 Hold the storage tray with both hands and slide it toward
Figure 30

Removing the Storage Tray Assembly

NOTICE: When replacing the storage tray, use the following
procedure:
a Align the pins on the backpanel of the main tray with the
b Lower the front of the storage tray and move it slightly
c
d Replace and tighten the storage tray retaining screw.
116
the front of the main tray approximately an inch, then lift
it straight up to remove it.
holes on the rear of the storage tray and slide the storage
tray onto the pins. See Figure 30.
forward or backward to align the pins on its side with the
slots on the main tray.
Slide the storage tray towards the rear of the main tray
until the pins are fully seated in the main tray slots.