Optional EGRAM Module
Before removing the optional EGRAM (System
Graphics RAM) module, perform the following proce-
dures:
•
•
•
Perform the following procedure to remove the
EGRAM module:
1 To release the EGRAM module from the standoffs, use a
Figure 41
Removing the Optional EGRAM Module
Remove the Main Tray Assembly from the system
unit.
Remove the Storage Tray Assembly from the Main Tray
Assembly.
Remove the CPU board assembly from the Main Tray.
pair of needle-nose pliers to squeeze the tabs on the
standoffs while lifting the corner of the EGRAM module
slightly, as shown in Figure 41.
Field Replaceable Units
FRU Removal and Replacement
131
Need help?
Do you have a question about the Visualize b132L and is the answer not in the manual?