Selftest Failures - HP Visualize b132L Service Handbook

Selftest Failures

Chassis codes are the key to debugging selftest errors.
If a failure is found during selftest, chassis codes are
displayed in the diagnostic LEDs.
the LED error code
To get additional information about failures from the
boot console interface, use the Service menu pim, pdt,
and Chassis Code commands.
In the following table, shaded LEDs indicate that they
are lit.
Table 7 LED Error Codes
LED Value Chassis Code
N/A
7401
N/A
7000-7F00
1030 - 4099
.
RS-232
Range
Reserved
No memory found FAULT
Likely cause: SIMMs or processor
board
Reserved
Memory Error FAULT
Likely cause: Memory SIMMs. Sys-
tem Console indicates which SIMM.
Processor board FAULT
Troubleshooting
Selftest Failures
Using Table 7, find
Description
61