Chap5.doc 101 Thu Jul 25 10:24:29 1996
Figure 30
NOTICE:
4 Hold the storage tray with both hands and slide it toward
the front of the main tray approximately an inch, then lift
it straight up to remove it.
Removing the Storage Tray Assembly
When replacing the storage tray, use the following
procedure:
a Align the pins on the backpanel of the main tray with the
holes on the rear of the storage tray and slide the storage
tray onto the pins. See Figure 30.
b Lower the front of the storage tray and move it slightly
forward or backward to align the pins on its side with the
slots on the main tray.
c
Slide the storage tray towards the rear of the main tray
until the pins are fully seated in the main tray slots.
d Replace and tighten the storage tray retaining screw.
Field Replaceable Units
FRU Removal and Replacement
101