Removing Eisa, Gsc, And Pci Option Boards; Removing An Eisa, Gsc, Or Pci Option Board - HP Visualize b132L Service Handbook

Field Replaceable Units
FRU Removal and Replacement

Removing EISA, GSC, and PCI Option Boards

Before removing EISA, GSC, or PCI option boards
from the system unit, remove the Main Tray Assembly
from the system unit.
NOTE: Slot 1 supports GSC or PCI option boards; slot 2 supports
EISA, GSC, or PCI option boards.
Perform the following steps to remove an EISA, GSC,
or PCI option board:
1 Push in the locking tab and slide the option board support
Retaining Screw
Figure 38

Removing an EISA, GSC, or PCI Option Board

2 Remove the option board retaining screw, as shown in
3 Grasp the option board by the edge with both hands and
126
bracket toward the rear of the main tray to remove it, as
shown in Figure 38.
Figure 38.
pull it straight out.