Displaying And Setting The Monitor Type; The Monitor Command - HP Visualize b132L Service Handbook

Boot Console Interface

Displaying and Setting the Monitor Type

Displaying and Setting the Monitor
Type
Your system ships from the factory preset to use a
monitor with a specific resolution and frequency. If
you replace your workstation's monitor with a differ-
ent type of monitor, you must reconfigure your work-
station to support the new monitor.

The Monitor Command

The monitor command lets you change your worksta-
tion's graphics configuration. This command is avail-
able in the Configuration Menu of the boot console
interface.
The monitor command lets you change your
NOTICE:
workstation's graphics configuration before
you replace your monitor. For information
about changing the configuration after you
replace your monitor, go to the section
"Changing Your Monitor Type" in Appendix
B.
To display the current graphics and console informa-
tion, enter the following command;
monitor
193