Field Replaceable Units
FRU Removal and Replacement
Hard Disk Drive
Perform the following procedures before removing a
hard disk drive.
•
•
•
NOTICE:
The Storage Tray Assembly does not have to be
removed from the Main Tray to access a hard disk
drive in the rear position or the 3.5-inch floppy
drive.
Refer to Chapter 3 for supported storage tray
configurations.
Perform the following steps to remove a hard disk
drive from the storage tray:
1 Disconnect the power and data cables from the disk
124
Remove the Main Tray Assembly from the system
unit.
Remove the Storage Tray Cover.
Remove the floppy disk drive if you are removing a
hard disk drive in the front position of the Storage
Tray.
drive.