Removing The Cpu Board - HP Visualize b132L Service Handbook

Field Replaceable Units
FRU Removal and Replacement

Removing the CPU Board

Perform the following steps to remove the CPU board
from the main tray:
1 Pull the two ejector handles at the same time, as shown
Figure 40

Removing the CPU Board

2 Slide the CPU board out of the main tray.
NOTICE: Before installing a CPU board assembly, swing the
card ejectors out to the fully open position. After
sliding the CPU assembly into place, push firmly
on the ejector handles to fully seat the CPU board
connector in the backplane.
130
in Figure 40.