Early Model Cd-Rom Drive Scsi Address/Jumper Settings - HP Visualize b132L Service Handbook

The following figures show the CD-ROM and DDS
tape drive SCSI address and jumper settings. For
jumper settings for other types of drives, refer to the
label on your hard drive for specific jumper informa-
tion for that device.
NOTE: Remove or disable the terminators on all drives (disk, CD-
ROM, and DDS).
SCSI ID
0
1
2
3
4
Figure 4 Early Model CD-ROM Drive
SCSI Address/Jumper Settings
SCSI Jumpers
Configuration
FRU Configurations
SCSI ID
5
6
37