Storage Tray Assembly - HP Visualize c100 Service Handbook
C class
Hide thumbs
Also See for Visualize c100:
- Service handbook (282 pages) ,
- Install manual (33 pages) ,
- Supplementary manual (1 page)
Table of Contents
Advertisement
Storage Tray Assembly
Perform the following steps to remove the storage tray
assembly from the system unit:
1 Remove the storage tray retaining screw, as shown in
Figure 24
Removing the Storage Tray Assembly
2 If installed, remove any locking device from the storage
3 Place your fingertips in the finger groove on the bottom
4 Slide the storage tray completely out of the system unit.
Figure 24.
Retaining Screw
tray security tab on the rear of the system unit.
of the storage tray bezel and pull straight. as shown in
Figure 24.
Field Replaceable Units
FRU Removal and Replacement
93
Advertisement
Table of Contents
