Table of Contents
Advertisement
330
MULTIMEDIA
Track Info
Press the Info button on the touchscreen to display
the current track information. Press the X button
on the touchscreen to cancel this feature.
Audio
Refer to "Audio Settings" for the adjustable audio
settings.
USB/iPod® Mode
USB/iPod® Mode is entered by either inserting a
USB jump drive or iPod® cable into the USB port,
or by pushing the MEDIA button located on the
faceplate. Once in Media Mode, press the Source
button on the touchscreen, and select the USB/
iPod® button.
Inserting USB/iPod® Device
Gently insert the USB/iPod® device into the USB
Port. If you insert a USB/iPod® device with the
ignition ON, the unit will switch to USB/iPod®
mode and begin to play. The display will show the
track number and index time in minutes and
seconds. Play will begin at the start of track 1.
Browse
Press the Browse button on the touchscreen to
select an Artist, Albums, Genres, Songs, Playlists
or Folders from the USB/iPod® device. Once the
desired selection is made you can chose from the
available media by pressing the button on the
touchscreen. Press the Exit button on the
touchscreen if you wish to cancel the Browse
function.
Bluetooth® Mode
Bluetooth® Streaming Audio (BTSA) or Bluetooth®
Mode is entered by pairing a Bluetooth® device
containing music to the Uconnect system.
Before proceeding, the Bluetooth® device must be
paired with the Uconnect Phone to communicate
with the Uconnect system.
Refer to "Pairing a Phone" in the Phone Mode
section for the pairing procedure.
Once the Bluetooth® device is paired to the
Uconnect system, push the MEDIA button located
on the faceplate. Once in Media Mode, press the
Source button on the touchscreen and select the
Bluetooth® button.
NOTE:
For mobile phone compatibility and pairing instruc-
tions, please visit UconnectPhone.com.
AUX Mode
AUX Mode is entered by inserting a AUX device
using a stereo cable with a 3.5 mm audio jack into
the AUX port or by pushing the MEDIA button
located on the faceplate. Once in Media Mode,
press the Source button on the touchscreen, and
select the AUX button.
Inserting Auxiliary Device
Gently insert the Auxiliary device cable into the AUX
Port. If you insert an Auxiliary device with the
ignition on, the unit will switch to AUX mode and
begin to play.
Controlling The Auxiliary Device
The control of the Auxiliary device (e.g., selecting
playlists, play, fast forward, etc.) cannot be
provided by the radio; use the device controls
instead. Adjust the volume with the VOLUME rotary
knob or with the volume of the attached device.
The radio unit is acting as the amplifier for audio
output from the Auxiliary device. Therefore, if the
volume control on the Auxiliary device is set too
low, there will be insufficient audio signal for the
radio unit to play the music on the device.
Advertisement
Table of Contents
