Table of Contents
Advertisement
328
MULTIMEDIA
Setting Presets
Presets are available for all radio modes and are
activated by pressing any of the four preset
buttons on the touchscreen, located at the top of
the screen.
When you are receiving a station that you wish to
commit into memory, press and hold the desired
numbered button on the touchscreen for more than
two seconds or until you hear a confirmation beep.
The radio stores up to 12 presets in each of the
radio modes. Four presets are visible at the top of
the radio screen.
Audio Settings
1. Push the SETTINGS button on the right side of
the radio faceplate. If the settings button is
not present, push the MORE button on the
faceplate, then the Settings button on the
touchscreen.
2. Scroll down and press the Audio button on the
touchscreen to open the Audio Menu.
3. The Audio Menu shows the following options
for you to customize your audio settings:
Auto Play — Press the Auto Play button on the
touchscreen to select between ON or OFF.
This feature determines if music automati-
cally starts playing from a device when it is
first connected to the Media hub's USB port.
Equalizer — Press the Equalizer button on
the touchscreen to adjust the Bass, Mid and
Treble. Use the + or – buttons on the touch-
screen to adjust the equalizer to your
desired settings. Press the Back Arrow
button on the touchscreen when done.
Balance/Fade — Press the Balance/Fade
button on the touchscreen to adjust the
sound from the speakers. Use the arrow
button on the touchscreen to adjust the
sound level from the front and rear or right
and left side speakers. Press the Center C
button on the touchscreen to reset the
balance and fade to the factory setting.
Press the Back Arrow button on the touch-
screen when done.
Speed Adjust Volume — Press the Speed
Adjusted Volume button on the touchscreen
to select between OFF, 1, 2 or 3. This will
decrease the radio volume relative to a
decrease in vehicle speed. Press the Back
Arrow button on the touchscreen when done.
Loudness — Press the Loudness button on
the touchscreen to select the Loudness
feature. When this feature is activated, it
improves sound quality at lower volumes.
Clock Settings
1. Push the SETTINGS button on the faceplate,
or push the MORE button on the faceplate,
and then the settings button on the
touchscreen.
2. Select the Clock and Date button on the
touchscreen.
3. Next, select "Set Time" to change the time.
4. Select "Set Date" to change the date.
5. To set the time, select the Seek Up or Seek
Down arrows as appropriate. Select "12 hrs or
24 hrs", "AM" or "PM" or select the "Time
Zones" (if equipped).
6. Select the Done button when complete.
Advertisement
Table of Contents
