Table of Contents
Advertisement
92
GETTING TO KNOW YOUR VEHICLE
3. Push clamp wires up and under the flange of
the box (or flange of the Ram Box rail, if
equipped) to the semi clamped position.
Semi Clamped Position
4. Push clamp handles upward to the clamped
position to properly engage the clamps.
Clamped Position
NOTE:
Once clamped, be sure the clamps are not
improperly attached to the truck bed flange.
Improper Clamp Position
5. Disengage the stowage straps.
6. Unfold the center and rear panels to the
intermediate position.
NOTE:
The vehicle cannot be driven when the Tonneau
Cover is in this position.
Intermediate Position (Vehicle Cannot Be Driven)
NOTE:
When folding the center and rear panels, the
sections MUST be held together to avoid damage
to the cover material.
Incorrect Folding — Will Cause Damage
Advertisement
Table of Contents
