RAM 1500 CLASSIC 2020 Owner's Manual page 326

324 MULTIMEDIA
WARNING!
ALWAYS drive safely with your hands on the
wheel. You have full responsibility and assume
all risks related to the use of the Uconnect
features and applications in this vehicle. Only
use Uconnect when it is safe to do so. Failure to
do so may result in an accident involving serious
injury or death.
Changing The Volume
1. Start a dialogue by pushing the PHONE button
on the faceplate, then adjust the volume
during a normal call.
2. Use the radio ON/VOLUME rotary knob to
adjust the volume to a comfortable level while
the Uconnect system is speaking. Please note
the volume setting for Uconnect phone is
different than the audio system volume
setting.
Making A Phone Call
1. Push the PHONE button on the steering
wheel.
2. After the BEEP, say "dial" or "call" a full name
or phone number.
NOTE:
A phone call can also be made with the Uconnect
3.0 by pushing the phone button on the radio, and
selecting a particular contact in the phone book, or
recent calls.
Mute (Or Unmute) Microphone During Call
Push the "Play/Pause/Mute" hard button on the
radio or during a call, push the Voice Recognition
button on the steering wheel. After the BEEP, say
"mute" (or "mute off").
Pairing A Phone
To begin using your Uconnect Phone, you must pair
your compatible Bluetooth® enabled mobile
phone. Mobile phone pairing is the process of
establishing a wireless connection between a
cellular phone and the Uconnect system.
To complete the pairing process, you will need to
reference your mobile phone Owner's Manual.
Please visit UconnectPhone.com for complete
mobile phone compatibility information.
NOTE:
You must have Bluetooth® enabled on your

phone to complete this procedure.
The vehicle must be in PARK.

1. Place the ignition in the ACC or ON/RUN
position.
2. Push the Phone button on the faceplate.
NOTE:
If there is no phones currently connected with the
system, a pop-up will appear asking if you would
like to pair a mobile phone.
3. Select "Yes" to begin the pairing process.
4. Search for available devices on your
Bluetooth®-enabled mobile phone.
Press the Settings button on your mobile

phone.
Select Bluetooth® and ensure it is enabled.

Once enabled, the mobile phone will begin
to search for Bluetooth® connections.
5. If "No" is selected, and you still would like to
pair a mobile phone, press the Settings button
from the Uconnect Phone main screen.
Select Paired Phones, and then select Add

Device.
Search for available devices on your

Bluetooth® enabled mobile phone (see
below). When prompted on the phone,
select Uconnect and accept the connection
request.
6. Uconnect Phone will display an in progress
screen while the system is connecting.
7. When your mobile phone finds the Uconnect
system, select Uconnect.
8. When prompted on the mobile phone, accept
the connection request from Uconnect Phone.