Table of Contents
Advertisement
52
GETTING TO KNOW YOUR VEHICLE
Icon
Temperature Control
Provides the driver and passenger with independent temperature control. Push the red button on the faceplate or touchscreen or
press and slide the temperature bar towards the red arrow button on the touchscreen for warmer temperature settings. Push the
blue button on the faceplate or touchscreen or press and slide the temperature bar towards the blue arrow button on the
touchscreen for cooler temperature settings.
SYNC Button
Press the SYNC button on the touchscreen to toggle the SYNC feature on/off. The SYNC indicator illuminates when SYNC is on.
SYNC synchronizes the passenger temperature setting with the driver temperature setting. Changing the passenger's temperature
setting while in SYNC will automatically exit this feature.
NOTE:
The SYNC button is only available on the touchscreen.
Faceplate Blower Knob
Blower Control
Blower Control regulates the amount of air forced through the climate system. There are seven blower speeds available. Adjusting
the blower will cause automatic mode to switch to manual operation. The speeds can be selected using either the blower control
knob on the faceplate or the buttons on the touchscreen.
Touchscreen Blower
Faceplate: The blower speed increases as you turn the blower control knob clockwise from the lowest blower setting. The blower
Buttons
speed decreases as you turn the blower control knob counterclockwise.
Touchscreen: Use the small blower icon to reduce the blower setting and the large blower icon to increase the blower setting.
Blower can also be selected by pressing the blower bar area between the icons.
Mode Control
Select Mode by pressing one of the Mode buttons on the touchscreen to change the airflow distribution mode. The airflow
distribution mode can be adjusted so air comes from the instrument panel outlets, floor outlets, defrost outlets, and demist
outlets. The Mode settings are as follows:
Description
Advertisement
Table of Contents
