Media Mode - RAM 1500 CLASSIC 2020 Owner's Manual

Hide thumbs Also See for 1500 CLASSIC 2020:
Table of Contents

Advertisement

322
MULTIMEDIA
Speed Adjusted Volume (if equipped) — Select
Speed Adjusted Volume and push the ENTER/
BROWSE button. Turn the TUNE/SCROLL knob
to adjust the setting to Off, 1, 2, or 3. Push the
BACK button on the faceplate when done.
Loudness (if equipped) — Select Loudness and
push the ENTER/BROWSE button to mark the
check box on or off. Push the BACK button on
the faceplate when done.
AUX Volume Offset (if equipped) — Select AUX
Volume Offset and push the ENTER/BROWSE
button. Turn the TUNE/SCROLL knob to adjust
the setting + or – 3. Push the BACK button on
the faceplate when done.
Clock Setting
1. Push the MENU button at the bottom of the
radio, and push the ENTER/BROWSE button
for System Settings. Next, select the Time and
Format setting and then select Set Time by
pushing the ENTER/BROWSE button.
2. Adjust the hours or minutes by turning the
TUNE/SCROLL knob, then pushing the ENTER/
BROWSE button to move to the next entry. You
can also select 12 hr or 24 hr format by turning
the TUNE/SCROLL knob, then pushing the
ENTER/BROWSE button on the desired
selection.
3. Once the time is set, press the BACK button to
exit the time screen.
M
M
EDIA
ODE
Operating Media Mode
Media Mode is entered by pushing the MEDIA
button on the faceplate located to the left of the
display. Once in Media Mode, press the MEDIA
button in order to select the desired media source.
AUDIO SOURCE SELECTION
Push the MEDIA button on the faceplate to select
the desired audio source, disc (if equipped), AUX,
USB or Bluetooth® audio device.
SEEK UP/SEEK DOWN
Push and release the SEEK UP
faceplate for the next selection.
Push and release the SEEK DOWN
the faceplate to return to the beginning of the
current selection, or return to the beginning of the
previous selection if the Media is within the first
three seconds of the current selection.
Fast SEEK UP
Push and hold the SEEK UP
button on the
faceplate and the desired mode will begin to fast
forward through the current track until the button
on the faceplate is released.
Fast SEEK DOWN
Push and hold the SEEK DOWN
faceplate and the desired mode will begin to
rewind through the current track until the button
on the faceplate is released.
TRACK INFO
Push the INFO button on the faceplate to display
the current track information.
AUDIO
Refer to "Operating Radio Mode" in "Radio Mode"
in this chapter for the adjustable audio settings.
USB/iPod® Mode
button on the
USB/iPod® Mode is entered by either inserting a
USB Jump Drive or iPod® cable into the USB port,
button on
or by pushing the MEDIA button on the faceplate
located to the left of the display. Once in Media
Mode, push the MEDIA button and select USB/
iPod®.
Inserting USB/iPod® Device
Gently insert the USB/iPod® device into the USB
port. If you insert a USB/iPod® device with the
ignition ON/RUN and the radio On, the unit will
switch to USB/iPod® mode and begin to play when
you insert the device. The display will show the
track number, and index time in minutes and
seconds. Play will begin at the start of track 1.
button on the

Advertisement

Table of Contents
loading

Table of Contents