When installing the power distribution center cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow
water to get into the power distribution center and possibly result in an electrical system failure.
When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The use of a fuse with a rating other than indicated may
result in a dangerous electrical system overload. If a properly rated fuse continues to blow, it indicates a problem in the circuit that must be corrected.
Cartridge Fuse
–
–
–
25 Amp Clear
–
25 Amp Clear
–
–
–
15 Amp Blue
–
20 Amp Yellow
Micro Fuse
10 Amp Red
Rear Camera / Park Assist - If Equipped
10 Amp Red
Rear Seat Heater Switch - If Equipped
Rear Heated Seats & Heated Steering Wheel – If Equipped
Front Heated Seats – If Equipped
10 Amp Red
Climate Control
10 Amp Red
Upfitters – If Equipped
Electrochromatic Mirror / Smart High Beams – If Equipped