Uconnect 3 With 5-Inch Display; Introduction - RAM 1500 CLASSIC 2020 Owner's Manual

NOTE:
Some mobile phones will require you to enter the PIN.
9. When the pairing process has successfully
completed, the system will prompt you to
choose whether or not this is your favorite
phone. Selecting "Yes" will make this phone
the highest priority. This phone will take
precedence over other paired phones within
range and will connect to the Uconnect system
automatically when entering the vehicle. Only
one mobile phone and/or one Bluetooth®
audio device can be connected to the
Uconnect system at a time. If "No" is selected,
simply select Uconnect from the mobile
phone/audio device Bluetooth® screen, and
the Uconnect system reconnects to the
Bluetooth® device.
NOTE:
Software updates on your phone or the Uconnect
system may interfere with the Bluetooth®
connection. If this happens, simply repeat the
pairing process. However, first, make sure to
delete the device from the list of phones on your
Uconnect system. Next, be sure to remove
Uconnect from the list of devices in your phone's
Bluetooth® settings.
Phonebook Download — Phonebook
Transfer From Mobile Phone
If equipped and specifically supported by your
phone, Uconnect Phone will ask you if you want to
download names (text names) and number entries
from your mobile phone's phonebook. Specific
Bluetooth® Phones with Phonebook Access Profile
may support this feature. See UconnectPhone.com
for supported phones.
Receiving A Call — Accept (And End)
1. When an incoming call rings or is announced
on Uconnect, push the PHONE button on the
faceplate.
2. To end a call, push the PHONE button on the
steering wheel or the PHONE button on the
faceplate.
NOTE:
A phone call can also be accepted, and ended by
pushing the steering wheel PHONE button.
Transfer Ongoing Call Between Handset
And Vehicle
With a call in progress use the browse/enter scroll
wheel to select transfer then press the enter
button or push the "Phone Pickup" button on the
steering wheel controls during a call, push the
Voice Recognition button on the steering wheel.
After the BEEP, say "transfer call."
MULTIMEDIA

UCONNECT 3 WITH 5-INCH DISPLAY

I
NTRODUCTION
Uconnect 3 With 5-inch Display
1 — RADIO
Push the RADIO button on the faceplate to enter
Radio Mode. The different tuner modes; FM/AM/
SXM (if equipped), can be selected by pressing the
corresponding buttons on the touchscreen in
Radio Mode.
2 — COMPASS
Push the COMPASS button on the faceplate to
display the current direction of the vehicle.
3 — SETTINGS
Push the SETTINGS button on the faceplate to
display the customer programmable features.
325
9