Table of Contents
Advertisement
84
GETTING TO KNOW YOUR VEHICLE
Storage Position
The storage position for the bed extender is at the
front of the truck bed which maximizes the bed
cargo area when not in use.
To install the bed extender into the storage
position, perform the following:
1. Make sure the center handle is unlocked
using the vehicle key and rotate the center
handle vertically to release the extender side
gates.
Center Handle And Lock
1 — Center Handle Lock
2 — Handle
2. With the side gates open, position the
extender fully forward in the bed against the
front panel.
Storage Position
3. Rotate the side gates closed allowing the
outboard ends to be positioned in front of the
cargo tie down loops.
Cargo Tie Down Loop
4. Rotate the center handle horizontally to secure
the side gates in the closed position.
Side Gates Closed
5. Lock the center handle using the vehicle key to
secure the panel into place.
Divider Position
The divider position is intended for managing your
cargo and assisting in keeping cargo from moving
around the bed. There are 11 divider slots along
the bed inner panels which allow for various
positions to assist in managing your cargo.
Advertisement
Table of Contents
