Table of Contents
Advertisement
232
IN CASE OF EMERGENCY
2. Lift the spare tire with one hand to give
clearance to tilt the retainer at the end of the
cable and position it properly across the wheel
opening.
Pushing The Retainer Through The Center Of The Wheel
And Positioning It
3. Remove the extension with the hook and
reattach the short extension 5. Attach the lug
wrench to the extension tubes with the curved
angle facing away from the vehicle. Insert the
extension tubes through the access hole
between the lower tailgate and the top of the
bumper and into the winch mechanism tube.
Raising The Spare Tire
4. Rotate the lug wrench handle clockwise until
the wheel is drawn into place against the
underside of the vehicle. Continue to rotate
until you feel the winch mechanism slip, or
click three or four times. It cannot be
overtightened. Push against the tire several
times to ensure it is firmly in place.
Rotating The Lug Wrench Handle
NOTE:
The winch mechanism is designed for use with the
extension tube only. Use of an air wrench or other
power tools is not recommended and can damage
the winch.
R
T
J
A
EINSTALLING
HE
ACK
1. Tighten the jack all the way down by turning
the jack turn-screw counterclockwise until the
jack is snug.
2. Position the jack and tool bag. Make sure the
lug wrench is under the jack near the jack
turn-screw.
Jack And Tool Bag
T
ND
OOLS
Advertisement
Table of Contents
