Table of Contents
Advertisement
286
IDENTIFICATION DATA
V
I
N
EHICLE
DENTIFICATION
The Vehicle Identification Number (VIN) is found on
the left front corner of the instrument panel, visible
through the windshield.
Vehicle Identification Number
NOTE:
It is illegal to remove or alter the VIN.
TECHNICAL SPECIFICATIONS
BRAKE SYSTEM
If power assist is lost for any reason (for example,
UMBER
repeated brake applications with the engine off),
the brakes will still function. However, you will
experience a substantial increase in braking
effort to stop the vehicle.
If either the front or rear hydraulic system loses
normal braking capability, the remaining system
will still function with some loss of overall braking
effectiveness. This will be evident by increased
pedal travel during application, greater pedal
force required to slow or stop, and activation of
the "Brake Warning Light" and the "ABS Warning
Light" (if equipped) during brake use.
WHEEL AND TIRE TORQUE SPECIFICATIONS
Proper lug nut/bolt torque is very important to
ensure that the wheel is properly mounted to the
vehicle. Any time a wheel has been removed and
reinstalled on the vehicle, the lug nuts/bolts
should be torqued using a properly calibrated
torque wrench using a high quality six sided (hex)
deep wall socket.
T
S
ORQUE
PECIFICATIONS
Lug Nut/
**Lug
Lug Nut/
Bolt
Nut/Bolt
Bolt Type
Torque
Size
130
M14 x
Ft-Lbs
Cone
1.50
(176 N· m )
**Use only authorized dealer recommended lug
nuts/bolts and clean or remove any dirt or oil
before tightening.
Lug Nut/
Bolt
Socket
Size
22 mm
Advertisement
Table of Contents
