Uconnect Settings; Uconnect 3 Settings - RAM 1500 CLASSIC 2020 Owner's Manual

294 MULTIMEDIA

UCONNECT SETTINGS

The Uconnect system uses a combination of
buttons on the touchscreen and buttons on the
faceplate located on the center of the instrument
panel. These buttons allow you to access and
change the Customer Programmable Features.
Many features can vary by vehicle.
Buttons on the faceplate are located below and/or
beside the Uconnect system in the center of the
instrument panel. In addition, there is a Scroll/
Enter control knob located on the right side. Turn
the control knob to scroll through menus and
change settings. Push the center of the control
knob one or more times to select or change a
setting.
Your Uconnect system may also have Screen Off
and Mute buttons on the faceplate.
Push the Screen Off button on the faceplate to turn
off the Uconnect screen. Push the button again or
tap the screen to turn the screen on.
Push the Back Arrow button to exit out of a Menu
or certain option on the Uconnect system.
C P
USTOMER ROGRAMMABLE
U 3 S
CONNECT ETTINGS
Uconnect 3 Buttons On The Touchscreen And Buttons On
The Faceplate
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
F —
Push the Settings button to display the settings
EATURES
menu screen. In this mode, the Uconnect system
allows you to access all of the available
programmable features.
NOTE:
Only one touchscreen area may be selected at a
time.
When making a selection, press the button on the
touchscreen to enter the desired menu. Once in
the desired menu, press and release the preferred
setting and make your selection. Once the setting
is selected, press the Back Arrow/Done button on
the touchscreen to return to the previous menu.
Pressing the Up or Down Arrow buttons on the right
side of the screen will allow you to toggle up or
down through the available settings.
NOTE:
All settings should be changed with the ignition in
the ON/RUN position.
The following tables list the settings that may be
found within the Uconnect 3 radio, along with the
selectable options pertaining to each setting.