Table of Contents
Advertisement
90
GETTING TO KNOW YOUR VEHICLE
3. From the released position, send the clamps
to the Stowed Position by pushing from the
yellow bumper up. Listen for a "clicking" sound
to confirm the clamp has been properly
stowed.
Stowed Position
CAUTION!
Make sure the Tonneau Cover clamp and clamp
wire are in the proper stowed position. If the
clamp and clamp wire are not properly stowed,
damage to the Tonneau Cover material will
result.
4. Fold the rear panel up onto the center panel
(intermediate position).
Folded Rear Panel (Intermediate Position)
NOTE:
The vehicle cannot be driven when the Tonneau
Cover is in this position.
5. Fold the rear and center panels up onto the
front panel (Tri-Folded position).
Tri-Folded Position
NOTE:
When folding the center and rear panels, the
sections MUST be held together to avoid damage
to the cover material.
Incorrect Folding — Will Cause Damage
Correct Folding — Hold Panels Together
Advertisement
Table of Contents
