Add A 'T' Junction To The Loop - INIM Electronics SmartLoop Programming Manual

Lo op Firmwar e release
<L oop Descri ption>
Lo op Type: < Loop Type Description >
Lo op Wiring
17.2

Add a 'T' junction to the loop

FROM COMPUTER
Go to SmartLoop System, Control panel x, Loop y, T Junction
In order to facilitate wiring operations, and allow the connection of devices that are isolated from the
loop, 'T' junctions can be used at splice points. When installing 'T' junctions, follow the respective
instructions in the Installation Manual paragraph 7.1 Note to the Installer regarding wiring and
connection compliancy.
FROM PANEL
Not available.
50
:
: 4 Wires
Press keys
001
view the other loops.
Press keys
parameters list.
Press keys
to change the values.
Press to save data and step back to the
previous menu.
Press ESC to quit without saving.
Programming Manual
and on the first line to
and to scroll the
and on the other lines
Programming the loops