Setting Up Holiday Periods - INIM Electronics SmartLoop Programming Manual

Level 1 Building occupants
The following codes are already active at default:
00001
00002
00003
00004
Refer to the Installation Manual - paragraph 2.5 Operator authorization—access levels.
FROM PANEL
<any key>,
or <any key>,
00 1 <Code D escription >
Ac cess level
Note:
PINs may have 4 or 5 digits.
13.4

Setting up holiday periods

FROM COMPUTER
Go SmartLoop System, System Programming, Holidays
This option will allow you to set specific periods which determine exceptions with regard timer
programming, for example, holidays, bank holidays, etc.
13.4.1 Parameters
Day of the Day of the week for weekly arrangements. Valid only if Duration = 1
week
Day of the Date of the holiday or start date of the holiday period. If you do not wish to specify the day,
month month or year, set "--". For example, to set the 3rd of every month of every year enter:
day=3, month = "--", year = "--". If you wish to create the setting using the day of the
Month week (e.g. Sunday), the day, month and year fields must be left as "--".
Year
Duration Duration expressed in days of the holiday period (1 at default).
FROM PANEL
<any key>,
or <any key>,
Holiday Num.
D AY : dd
M ONTH : mm
Y EAR : yy
40
-
User
Authorized User
Maintenance
Installer
8 Programming, <code>, 7 Access Codes, xxx Code,
8 <code> 7 xxx
: <level>
< PIN >
8 Programming, <code>, 4 TIMER Programming,
2 Holiday list,
8 <code> 4 2
01
-
Press keys and
codes.
Press key to go to the successive field.
Press keys and
view other holidays.
Press keys and
parameters list.
Press keys and
to change the values.
Programming the system
Programming Manual
to view the other
on the first line to
to scroll the
on the other lines