Forcing The Output Status Of Devices; Forcing The Output Status Of The Control Panel; Forcing The Device Leds On - INIM Electronics SmartLoop Programming Manual

Programming Manual
27.3

Forcing the output status of devices

FROM COMPUTER
Not available.
On first power-up, or during maintenance, it may become necessary to switch the output of a device
On/Off manually.
FROM PANEL
<any key>,
or <any key>,
Po int x/yyy < Descrip tion >
Ty pe :
S TATUS :
= Sel ect Point
27.4

Forcing the output status of the control panel

FROM COMPUTER
Not available.
On first power-up, or during maintenance, it may become necessary to switch the output of the
control panel On/Off manually.
FROM PANEL
<any key>,
or <any key>,
Su pervised a larm outpu t
S TATUS :
= Output Select
27.5

Forcing the device LEDs On

FROM COMPUTER
Not available.
On first power-up, or during maintenance, it may become necessary to switch the device LEDs On
manually. For example, in order to allow quick identification of a specific detector inside a large place
with many detectors.
FROM PANEL
<any key>,
or <any key>,
Po int
Ty pe :
S TATUS :
= Sel ect Point
Maintenance operations
7 Maintenance, <code>, 3 TEST Outputs, 1 Loop Output,
x Loop x, yyy device,
7 <code> 3 1 x yyy
< Device Type >
_F F
= Output ON /OFF
7 Maintenance, <code>, 3 TEST Outputs, 2 Panel Output,
x Output,
7 <code> 3 2 x
_F F
= Out put ON /OFF
7 Maintenance, <code>, 4 Test Point LED, x Loop x,
yyy device,
7 <code> 4 x yyy
x/yyy < Desc ription >
< Dev ice Type >
_ py OFF
= Output ON /OFF
Press keys and to view the adjacent
detectors.
Press ESC to confirm and step back to
the previous menu.
Press keys and to view the adjacent
outputs.
Press ESC to confirm and step back to
the previous menu.
Press keys and to view the adjacent
devices.
Press ESC to confirm the entry and step
back to the previous menu.
67