2. Set protocol parameters.
Type
The network camera adopting custom protocol must support getting stream through
standard RTSP.
Path
Contact the manufacturer of network camera for the URL (Uniform Resource Locator) of
getting main stream and sub-stream.
Note
The protocol type and the transfer protocol must be supported by the network camera to add.
3. Click OK.
After adding the customized protocol, you can see it in Protocol.
1.5 Platform Access
1.5.1 Configure LTS Connect
LTS Connect enables the mobile phone application and the service platform page
(dev.guardingvision.com) to access and manage your connected NVR, providing a convenient
remote access to the surveillance system.
Steps
1. Go to System → Network → Advanced → Platform Access.
2. Check Enable to activate the function. Then the service terms will pop up.
1) Enter Verification Code.
Network Video Recorder User Manual
Figure 1-12 Protocol Management
11