Network Configuration; General; Hik-Connect - HIKVISION DS-7100NI-Q1/P Series User Manual

5.2 Network Configuration

5.2.1 General

You shall properly configure the network settings before operating the device over network.
Steps
1. Go to Configuration → Network → General .
2. Set network parameters.
DHCP
If the DHCP server is available, you can enable DHCP to automatically obtain an IP address
and other network settings from that server.
Auto Obtain DNS
If DHCP is enabled. You can enable Auto Obtain DNS to automatically obtain Preferred DNS
Server and Alternate DNS Server.
3. Click Apply.

5.2.2 Hik-Connect

Hik-Connect provides mobile phone application and platform service to access and manage your
connected devices, which enables you to get a convenient remote access to the video security
system.
Steps
1. Go to Configuration → Network → Hik-Connect .
2. Turn on Enable. The service terms will pop up.
1) Scan the QR code to read the service terms and privacy statement.
Network Video Recorder User Manual
Figure 5-4 Network
19