Changing The Remote Button Function; Figure 4-16 Rem-B Display - Keysight Technologies U1281A User Manual

Changing the remote button function

This setting is used to enable or disable the remote probe button and map the remote
probe button's function to a multimeter soft key.
Parameter
rEM-b
To change the remote button function:
1 Press
2 Press
Figure 4-16
3 Press
corresponding numbers:
Number
b1
b2
b3
b4
b5
b6
b7
4 Press
step 3 to edit.
5 Press
6 Press and hold
Keysight U1281A/U1282A User's Guide
Range
(b1.E to b7.E)
while turning the rotary switch to access the Setup menu.
Shift
Esc
or on until
Hold
rEM-b display
Vsense
or to change the remote button function, according to the
Function
MaxMin/Peak
ΔNull/Vsense
Range/Auto
Hz/Log
Backlight/Dual
Shift/View
Hold
or on to navigate to the consecutive values, then repeat
Hold
to save your changes, or press
Hz
Save
until the multimeter restarts to return to normal operation.
Shift
Esc
Multimeter Setup Options
Defaul t setting
(b7.E)
is shown on the secondary display.
to discard your changes.
Shift
Esc
4
135