Pcie high-speed digitizer 2 channels, 10-bit, up to 10 gs/s, dc up to 2.5 ghz bandwidth (24 pages)
Summary of Contents for Keysight Technologies UXA
Page 1
Keysight UXA Signal Analyzers Option FT1 and FT2 - Frequency Mask Trigger Installation Note...
Page 2
The information contained in this document is subject to change without notice. Keysight Technologies makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Page 3
Estimated Adjustment and Verification Time: 0. Hours Introduction This kit contains the instructions to install either Option FT1 or Option FT2 on a Keysight UXA Signal Analyzer. FT1 or FT2 is supported by the N9067C Pulse application and the 89600 VSA application.
Page 4
Option FT1 and FT2 - Frequency Mask Trigger Installation Kit Contents Quantity Description Keysight Part Number Installation Note This note Option Upgrade Entitlement Certificate 5964-5178 Tools Required — Personal computer with internet access and USB port — USB storage device with >2GB free memory Installation Note N9040-90027...
Option FT1 and FT2 - Frequency Mask Trigger Installation Kit Installation Procedure License Installation Over USB 1. Locate the Option Upgrade Entitlement Certificate (5964-5178) from the kit. 2. Redeem the Option Upgrade Entitlement Certificate by following the instructions on the Certificate.
Page 6
Option FT1 and FT2 - Frequency Mask Trigger Installation Kit 7. The signal analyzer will automatically consume the License File. (This may take a few minutes) When the License File is consumed the Keysight License Manager will display a “Successful License Installation”...
Page 7
Adjustments Required None Performance Testing Required None For assistance, contact your nearest Keysight Technologies Sales and Service Office. To find your local Keysight office access the following URL, or if in the United States, call the following telephone number: http://www.keysight.com/find/assist...
Need help?
Do you have a question about the UXA and is the answer not in the manual?
Questions and answers