Changing The Sample Interval Duration; Figure 4-6 Time Display - Data Logging - Keysight Technologies U1281A User Manual

Changing the sample interval duration

This setting is used with the multimeter's Interval Data Logging feature (see page 108). The
multimeter will record a measurement value at the beginning of every sample interval.
Parameter
tiME
To change the sample interval duration:
1 Press
2 Press
Figure 4-6
3 Press
4 Press
step 3 to edit.
5 Press
6 Press and hold
Keysight U1281A/U1282A User's Guide
Range
(1 to 99999) s
while turning the rotary switch to access the Setup menu.
Shift
Esc
or on
Hold
icon appears to the left of the secondary display.
tiME display - data logging
Vsense
or to set the sample interval duration.
or on
Hold
to save your changes, or press
Hz
Save
until the multimeter restarts to return to normal operation.
Shift
Esc
until is shown on the secondary display and the
to navigate to the consecutive values, then repeat
to discard your changes.
Shift
Esc
Multimeter Setup Options
Defaul t setting
1 s
4
125