Instrument Button Up
Dress Cover Installation
1. Referring to
Figure
Figure 12
Dress Cover Installation
2. Attach the four rear feet (4) using the four panhead screws and washers (3). Torque the
screws to 21 in-lbs.
3. Install the four bottom feet (6) along with the locking keys.
4. Install the strap handles (2) to both sides of the instrument using the two screws (1) at either
end of the handles. Torque the screws to 21 in-lbs.
Installation Note N9042-90013
12, carefully slide the outer cover (5) onto the instrument.
Upgrade Instructions
17