Changing The Thermocouple Type; Figure 4-8 Coupl Display - Keysight Technologies U1281A User Manual

Changing the thermocouple type

This setting is used with temperature measurements. Select a thermocouple type that
matches the thermocouple sensor you are using for temperature measurements.
Parameter
CoUPL
To change the thermocouple type:
1 Press
2 Press
Figure 4-8
3 Press
4 Press
5 Press and hold
This Setup menu item is only applicable for the U1282A.
NOTE
Keysight U1281A/U1282A User's Guide
Range
tYPE K or tYPE J
while turning the rotary switch to access the Setup menu.
Shift
Esc
or on until
Hold
CoUPL display
Vsense
or to change the thermocouple type.
to save your changes, or press
Hz
Save
until the multimeter restarts to return to normal operation.
Shift
Esc
Multimeter Setup Options
Defaul t setting
tYPE K
is shown on the secondary display.
to discard your changes.
Shift
Esc
4
127