Table of Contents
Advertisement
Changing the beep frequency
The multimeter's beeper alerts users to the presence of circuit continuities, operator errors
such as incorrect lead connections for the selected function, and newly sensed values for
MaxMin and Peak recordings.
Parameter
bEEP
To change the beep frequency:
1 Press
2 Press
Figure 4-10
3 Press
feature.
4 Press
step 3 to edit.
5 Press
6 Press and hold
Keysight U1281A/U1282A User's Guide
Range
3200 Hz, 3268 Hz, 3339 Hz, 3413 Hz, 3491 Hz, 3572 Hz,
3657 Hz, 3746 Hz, 3840 Hz, 3938 Hz, 4042 Hz, 4151 Hz,
4267 Hz, or oFF
while turning the rotary switch to access the Setup menu.
Shift
Esc
or
on
until
Hold
bEEP display
Vsense
or
to change the beep frequency. Select
or
on
to navigate to the consecutive values, then repeat
Hold
to save your changes, or press
Hz
Save
until the multimeter restarts to return to normal operation.
Shift
Esc
Multimeter Setup Options
Defaul t setting
3840 Hz
is shown on the secondary display.
to disable the beeper
to discard your changes.
Shift
Esc
4
129
Advertisement
Table of Contents
