Changing The Ai Function's Phase Angle Condition; Table 3-3 Auto Identification Phase Angle Rules - Keysight Technologies U1732C User Manual

Changing the Ai function's phase angle condition

This setting is used with the Ai function (see
identify L, C, and R measurements automatically according to the angle of
impedance detected in the DUT.
Use this Setup item to change the default phase angle for the Ai function between
5° and 45°.
Parameter
Ai
Table 3-3
and R measurements selected.
Table 3-3 Auto identification phase angle rules
[1]
Phase angle
–Set < θ < +Set
θ ≥ +Set
θ ≤ –Set
[1] Where ±Set is the phase angle selected.
Keysight U1731C/U1732C/U1733C User's Guide
Range
(5 to 45)°
shows the correlation between the phase angle detected and the L, C,
Primary d isplay
R
L
C
Setup Options
page 42). The Ai function helps to
Defaul t setting
10°
Secondary d isplay
θ
Q
D
3
77