Table of Contents
Advertisement
Changing the Auto Power-Off and backlight timeouts
The multimeter's automatic power-off (see page 26) and backlight (see page 26) features
use timers to determine when to automatically turn the multimeter off and when to turn off
the backlight.
Parameter
AoFF
bLit
To change the Auto Power-Off and backlight timeout periods:
1 Press
2 Press
display.
Figure 4-3
Figure 4-4
3 Press
feature, change the last digit shown from
4 Press
step 3 to edit.
5 Press
6 Press and hold
Keysight U1281A/U1282A User's Guide
Range
(01.d to 99.d) or (01.E to 99.E) minutes
(01.d to 99.d) or (01.E to 99.E) seconds
while turning the rotary switch to access the Setup menu.
Shift
Esc
or
on
until
Hold
AoFF display
bLit display
Vsense
or
to change the timeout period. To enable or disable the timeout
or
on
to navigate to the consecutive values, then repeat
Hold
to save your changes, or press
Hz
Save
until the multimeter restarts to return to normal operation.
Shift
Esc
Multimeter Setup Options
Defaul t setting
(15.E) - 15 minutes, enabled
(15.E) - 15 seconds, enabled
or
is shown on the secondary
(enabled) to
(disabled).
to discard your changes.
Shift
Esc
4
123
Advertisement
Table of Contents
