Setting The Display Count; Figure 4-17 Disp Display - Keysight Technologies U1281A User Manual

4 Multimeter Setup Options

Setting the display count

This setting is used to set the multimeter's display count resolution. You may choose
between a high resolution and a low resolution.
Parameter
diSP
To change the display count:
1 Press
2 Press
Figure 4-17
3 Press
4 Press
5 Press and hold
136
Range
dddd or ddddd
while turning the rotary switch to access the Setup menu.
Shift
Esc
or on until
Hold
diSP display
Vsense
or to set the display count.
to save your changes, or press
Hz
Save
until the multimeter restarts to return to normal operation.
Shift
Esc
Defaul t setting
ddddd
is shown on the secondary display.
to discard your changes.
Shift
Esc
Keysight U1281A/U1282A User's Guide