Table of Contents
Advertisement
4
Multimeter Setup Options
Changing the temperature unit
This Setup item is locked for certain regions. Always set the temperature unit display per
CAUTION
the official requirements and in compliance with the National laws of your region.
Press
This setting is used with temperature measurements (see
displayed temperature unit(s) are available:
– Celsius only: Temperature measured in °C.
– Fahrenheit/Celsius: During temperature measurements, press
switch between °F and °C.
– Celsius/Fahrenheit: During temperature measurements, press
switch between °C and °F.
– Fahrenheit only: Temperature measured in °F.
Parameter
Unit
To change the temperature unit:
1 Press
2 Press
NOTE
Press
Figure 4-9
3 Press
4 Press
5 Press and hold
128
for > 1 second to unlock this setting.
MaxMin
Range
°C, °F/°C, °C/°F, or °F
while turning the rotary switch to access the Setup menu.
Shift
Esc
or
on
Hold
for > 1 second to unlock this setting.
MaxMin
Unit display
Vsense
or
to change the temperature unit.
to save your changes, or press
Hz
Save
until the multimeter restarts to return to normal operation.
Shift
Esc
page
until
is shown on the secondary display.
to discard your changes.
Shift
Esc
Keysight U1281A/U1282A User's Guide
78). Four combinations of
for > 1 second to
Range
for > 1 second to
Range
Defaul t setting
°C
Advertisement
Table of Contents
